View Single Post
Old 04-16-2018, 08:32 AM   #49
Junior Member
Join Date: Apr 2018
Posts: 19
vCash: 500
Default Back on topic.

I was able to get the outdrive serviced with new impeller/seals and oil. I installed new anodes and the 4 blade stainless 18p prop.

I have ordered a new tach, as I verified power and signal to the original to no avail.

I did a quick test run yesterday although it was quite windy. It is much better out of the hole than the old 3 blade 21p. I was able to hit 49mph on the GPS without much fussing with trim etc. Ill give it another go when I have a functional tach and push a bit harder.

On a related note, what is a good operating temp for the engine? Water temp was in the high 60's, engine seemed to be operating around 150.
Krispy is offline   Reply With Quote